Failover system (Smart PDU or ATM Monitoring system)

Requirement of IoT failover system

  • In the last five years India have lost Rs 235.96 crore to incidents of burglary, robbery, dacoit and theft.
  • The number has been going up since 2013-14 when 587 such cases were reported, amounting to a loss of Rs 34.346 crore.
  • In 2017-18, 972 cases of theft and burglary were recorded, an increase of 65 per cent, leading to a loss of Rs 44.49 crore.
  • RBI has advised banks to review and strengthen the security arrangement in their branches and ATMs to deal with instances of robbery, etc. and for dealing with risk perceptions emerging from such incidents. These include coverage of branch/ATM by CCTVs and alarming systems.
  • Wherever the security systems are installed, electrical power and network connectivity is required to operate. Once the power failed or internet cuts, the security is compromised.At the time of robbery, robbers cut the power,
  • breaks the internet and network connectivity to turn off the CCTV and Alarming system. Thus, any alert or evidence remains uncaptured.
  • There is no security system, which will give alerts for robbery even after the Electricity, or Internet is failed.

Proposed Solution for IoT failover system for Retail stores

The Transfour IoT product line offers an active monitoring solution designed to protect against physical threats, environmental or human, that can cause downtime or disruption to your IT infrastructure. Transfour Smart Power Distribution Unit integrates with power system, security system and Internet connectivity for Server Rooms. Being immediately aware of Environmental Conditions, Power failure, UPS down, NVR Down and Interoffice connectivity down. The system is rack mountable with inbuilt battery backup and 4G ready. It is inbuilt 4G connectivity for sending alerts even if loss of internet activity. In case of abnormal event happens, it will rapidly give alarm notifications with email, SMS, or Push Notification etc., for a 24x7 hours real-time monitoring of remote locations Server Rooms.

Our Solution

  • 24/7 monitoring with complete record of every downtime i.e. Internet or Power failure.
  • Real-Time remote monitoring of connected device’s Power and Network connectivity i.e. NVR or DVR equipment, Router, POE Switch / Camera Power, Alarm Panel. Monitoring of UPS Power Output failure, Device unplugging, Power over and low consumption, Wrongly Plugged devices, plugs swapping, Internet / Network Failure, NVR Power Failure, Router Power Failure, Temperature & Humidity, POE Switch/ Camera Power Failure, Alarm Panel Power Failure, Device IP Monitoring.
  • Able to distinguish Wire-Cut and Power failure.
  • Five – 6 Amp Sockets with POE for Cameras.
  • Inbuilt 4G Internet Connectivity, backup internet for cameras with Data recording in Cloud.
  • Inbuilt storage for camera recording with Location of Device from mobile tower.
  • Inbuilt Battery for powering internal equipment with battery level Monitoring.
  • Plug and play operation, Standalone: Not network dependent, not power dependent.
  • Elegant design, 19 Inch Rack Mounted and Easy to install.
  • Web-based User-friendly interface allow real time monitoring at anytime and anywhere.
  • Our Solution is available as SAAS / Rental.
  • Parallel CCTV Recording with Cloud Storage for Data.
  • Available with video recording (4G) and without video recording (2G-3G).

  • Insert the USB 4G Dongle/ Adapter. In Built Battery and 4G, connectivity keeps the PDU connected to CMS even If the internet or power fails.
  • PDU will also display its location on the CMS using the mobile tower, which will help to identify the location instantly at the time robbery.
  • Plug the NVR, PoE Switch / Camera Power, Router and Alarm Panel to the right sockets as labelled. Do not swap or Mismatch the device plugs on the socket.
  • If the devices are not plugged to the correct sockets, it will give False Notification on the CMS.
  • Put the PDU plug to UPS. If the UPS power fails or some person unplugs or swaps the plugs the NVR, Router, PoE Switch / Camera Power or Alarm Panel, you will get alert on the CMS.
  • If some device stops working or starts consuming more power. Then also, PDU will alert you on CMS.
  • If robbery happens, some person cuts the network, or internet fails, you will get Immediate Alerts on CMS and the PDU will store the previous 60 sec and next 300 sec camera video on the on-board memory and will send to CMS using 4G dongle to access remotely.
  • Real-Time remote monitoring of connected device’s Power and Network connectivity.
  • Supports Power status monitoring of NVR or DVR equipment, Router, POE Switch / Camera Power, Alarm Panel.
  • Able to distinguish Wire-Cut and Power failure.
  • Five – 6 Amp Sockets.
  • 4G Enabled for alarm notification on CMS / SMS / Email.
  • Internet Connectivity Backup for cameras.
  • Built in Battery backup for Microcontroller and sensors to ensure 24×7 Monitoring.
  • Monitors Internet Connectivity.
  • Device IP Monitoring.
  • In-Built FTP Server for saving last 60 sec and next 300 sec snapshots from IP camera into the system’s onboard storage before going off, which can be accessed remotely.
  • Inbuilt Battery level Monitoring.
  • Plug and play operation.
  • Location of Device from mobile tower.
  • Elegant design, 19 Inch Rack Mounted and Easy to install.
  • Very Hard to remove.
  • Standalone: Not network dependent, not power dependent.
  • UPS Power Input failure.
  • Power Output failure.
  • Device unplugging.
  • Power over and low consumption.
  • Wrongly Plugged devices.
  • Plugs swapping.
  • Internet / Network Failure.
  • NVR Power Failure.
  • Router Power Failure.
  • Temperature & Humidity Monitoring
  • POE Switch/ Camera Power Failure.
  • Alarm Panel Power Failure.
  • Unauthorized activity.
  • RS485 Connectivity.
  • MODBUS Connectivity.
  • RS232 Connectivity.
  • WIFI Connectivity.
  • Bluetooth Connectivity.
  • LoRa Connectivity.
  • Temperature & Humidity Monitoring
  • Smoke Detection.
  • Door Status Detection.
  • Power metering (EB).
  • Air Conditioning Monitoring.
  • Generator Set Monitoring.
  • UPS battery Monitoring
  • Access control Monitoring
  • People Counter.
  • Mobile App with Push Notification Alerts for Local user.
  • 24/7 monitoring with complete record of every downtime i.e. Internet or Power failure.
  • Instant alerts of Environmental Conditions help to quick decisions to prevent downtime.
  • Easy identification with the alerts from the faulty equipment.
  • Location from the mobile tower helps to identify the location instantly at the time robbery.
  • Footage taken at the time of network failure can help to identify the cause of downtime and at the time of robbery, it can help to keep an evidence of the event.
  • With Rapid Response Time you can evaluate an issue and send the appropriate authorities if need be.